Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Calculating Stat vs Att/M.Att (Prime Scrolls)
#1
Okay, so the obvious answer to this is to just add everything up and compare the two, but is that really all there is to it? I feel like there's a formula or something I should be using to calculate it more accurately. How does secondary stat factor into it as well? Do I need to factor in % Stats/% M.Att?
1.19 Int:1 M.Att that I got from calculating mine doesn't make any sense to me.
Reply
#2
if you go beyond that, constants start to get annoying, there was a thread with a massive formula but i couldn't find it, best i could find was this.

http://www.southperry.net/showthread.php?t=54311

edit: if you have an INORDINATE amount of attack compared to int, then that ratio doesn't seem too far off really, i myself am somewhere around 2.5 to 1.
Reply
#3
Yes, you'll definitely have to consider your %stats. Not much with %ma as it is multiplicative to both your MA and stat portion of the formula(4P+S).

Removing multipliers and such:

(4P+S)*A=R

4P+S : A is what you need to be taking into consideration, where

P=Primary stat * (1+Primary%) + Primary stat that doesn't get affected by stat%
S= ^Replace primary with secondary
A=M/Attack

Edit: usually though your secondary stat is negligible, so it's simply P:A

i.e. Primary Stat : Attack / (1+Primary stat%)
Reply
#4
Liable Wrote:Yes, you'll definitely have to consider your %stats. Not much with %ma as it is multiplicative to both your MA and stat portion of the formula(4P+S).

Removing multipliers and such:

(4P+S)*A=R

4P+S : A is what you need to be taking into consideration, where

P=Primary stat * (1+Primary%) + Primary stat that doesn't get affected by stat%
S= ^Replace primary with secondary
A=M/Attack

Edit: usually though your secondary stat is negligible, so it's simply 4P:A

If you ignore secondary stats, you dont use the 4x multiplier nor the potential, since the formula becomes a straight multiplication
Reply
#5
ShinkuDragon Wrote:If you ignore secondary stats, you dont use the 4x multiplier nor the potential, since the formula becomes a straight multiplication

Oh.. yes. Brb correcting. (In fact you reminded me something else too)
Reply
#6
Alright that's easy enough, thanks guys.
Reply
#7
Would comparing the effect of an allstat potion (Blessing) to that of an attack potion be a good way to avoid having to add up all sources of att and stats?
(In other words, do potions enter the formula at the same place as +stat/att on gear?)
Reply
#8
SaptaZapta Wrote:Would comparing the effect of an allstat potion (Blessing) to that of an attack potion be a good way to avoid having to add up all sources of att and stats?
(In other words, do potions enter the formula at the same place as +stat/att on gear?)

Pretty sure they do, i know apples and such did but never bothered checking with stat potions, shouldnt be any different though
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)