Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"Hit mule"
#1
What class would have more accuracy by Lv50?
Preparing for when PG gets patched, I was curious what should be used.

Pure-Dex Assassin?
Pure-Dex Archer? (Bow? Crossbow? Does it matter?)
Pure-Dex Gunslinger?
Pure-Dex Brawler? (Their dex:acc ratio is .8 per point in dex right?)

Maxing all the accuracy increasing skills such as Blessing of the Amazon, Bullet Time, Nimble Body, etc.

What sort of equips are needed to hit BF and Anego at Lv50?

Accuracy needed for 100% hit is around ~455 for BF and ~652 for Anego according to the accuracy calculator here:
http://screamingstatue.com/accuracy/
Reply
#2
Since Dex counts for 0.8 accuracy and Luk counts for 0.5 accuracy a Pure-Dex Archer would have the most accuracy by level 50.

Not sure about your other questions. Zakum Helm as obvious as it might be for one.
Reply
#3
As far as i know for every class its 1dex-0,8acc ratio
Best bet would be Archer
Prefarably xbowman(cheaper scrolls mean better scrolled weapons(+acc))
Or if your funded it doesnt really matter
Also buy maplepops,max your BoF(like an extra 20acc)
accuracy wg ,accshoes,...
Reply
#4
It isn't the same ratio, archers/thieves drop by 0.2 per point for 0.6(dex)/0.3(luk) acc per point. I think funslingers get shafted even further to 0.5/0.25 or something.

Brawler is likely your best bet, since they don't need any STR to do job advance or anything.
Reply
#5
Brawler is hands down the best. They can just spam CSB their target and not get hit too.
Reply
#6
Takebacker Wrote:Brawler is hands down the best. They can just spam CSB their target and not get hit too.

Read the actual thread XD.

Edit: Never mind.

Pure Dex Brawlers might be a pain in the arse to level to 50, though.
Reply
#7
Not to mention, infighter's Maple Weapon adds accuracy. Knuckles also have knuckle accuracy scrolls (unless these do not exist in GMS).
Reply
#8
TehMatt Wrote:Not to mention, infighter's Maple Weapon adds accuracy. Knuckles also have knuckle accuracy scrolls (unless these do not exist in GMS).

They exist, and they're cheap as balls.
Reply
#9
TehMatt Wrote:Not to mention, infighter's Maple Weapon adds accuracy. Knuckles also have knuckle accuracy scrolls (unless these do not exist in GMS).

They exist in GMS.
Reply
#10
Brawlers actually get 0.9 DEX per point, which is more than anyone else. You're best off going with them if you can get one to level 50.

You'll have around 250 DEX, which means 265 acc. You're still quite short, though. Best way to hit something better is to level up.
Reply
#11
Russt Wrote:Brawlers actually get 0.9 DEX per point, which is more than anyone else. You're best off going with them if you can get one to level 50.

You'll have around 250 DEX, which means 265 acc. You're still quite short, though. Best way to hit something better is to level up.

I get from 50 base acc to 230 or so with equips if I want. I think Brawlers can't wear quite as much acc gear (MoN and stuff) but they can definitely equip the accuracy to get into the 1% hit range for BF/Anego (230/330)

65 acc, for hitting Anego 1% of the time:
39.5 acc ZHelm
25 acc Knuckle?
Reply
#12
Stereo Wrote:I get from 50 base acc to 230 or so with equips if I want. I think Brawlers can't wear quite as much acc gear (MoN and stuff) but they can definitely equip the accuracy to get into the 1% hit range for BF/Anego (230/330)

65 acc, for hitting Anego 1% of the time:
39.5 acc ZHelm
25 acc Knuckle?

Your equips add about 180 acc, and with the 265 acc from the pure-dex build, that'd be 445 acc, which easily puts it in the 1% hit range.
Unless you have really expensive equips for your brawler Goggleemoticon
Reply
#13
Not to mention the butt load of avoid brawlers also get from dex o_o
Reply
#14
Pure dex brawler, mine is still lvl 30 from Dojo patch since they didn't patch PG.
Reply
#15
Don't forget that Pirates get the +20 ACC skill in first job, plus mastery.

And, the Crocell hat Hurt

And as someone said before, Brawlers get 0.9 acc per DEX point, so a Brawler is the way to go.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)