Fake IDs

You sir suck at using goggle.

 Spoiler

Step1
You need an old fashioned laminated driver’s license or ID card, preferable with your picture and name on it. This example works well with the older Washington State ID and most similar fake laminated cards.
Step2
Scan the ID as is with your trusty flat-bed scanner at a decent resolution. You’ll need to scan both sides of the ID. Open the files with Photoshop or your favorite image fake id editor.
Step3
Change the birth date to make yourself (or the hot young girl you’re dating) at least 21. Make sure the expiration and issue dates are valid.
Step4
Print the id photos with the best color printer you can find. Try several times until the size and color match perfectly. Remember, until this time DO NOT touch the original ID card.
Step5
Cut your fake id copies perfect to size and set aside for later.
Step6
Take a razor blade and split the laminated sides of the fake ID in half. Start at one corner and work slowly. Do not hurry and do not tear the plastic.
Step7
Pull any cardboard out from the middle. Don’t worry if you can’t get it all.
Step8
Get a pan of boiling water going. Drop both fake pieces into the water and let them boil for 20 to 30 minutes, or as needed.
Step9
Remove any excess cardboard or paper. At this point there still may be an impression of the photo on the front piece. Don’t fret.
Step10
Take a pair of tweezers and pull the impression off the inside of the front piece. It should peel off the fake id like a piece of skin. At this point you have 2 blank sides of the ID with the gold stripping / logo (or similar) still in tact.
Step11
Place the perfect fakeid copies between the two sides and re-laminate. Don’t try this at Kinko’s unless you know the night manager. You many need to get your own laminator, but they shouldn’t be too expensive.
Step12
That’s it, have fun at the clubs with your fake id!

BUT WHERE WILL I DO THIS WITHOUT A KINKO NEARBY?

BUT WHERE WILL I DO THIS WITHOUT A KINKO NEARBY?

Kinko is only for the laminating process. If you know someone that works in a warehouse you can use their laminator

Or

You go to ebay and buy a laminator Like this too

Also if you want to skip the whole laminating process. Put the fake id in one of those plastic pouches and seal it.

just ask someone who looks similar to you for their old ID, me and like 5 friends did that and it worked flawlessly.

i got in a club with a guys ID who is way lighter than me, with a huge beard and a fro, honestly, as long as its a real ID, i feel like bouncers in college towns dont really care all that much

Why in the world would someone put their name on that image?

Because the Quebecois are proud of everything Quebecois.

18 biatch. But yeah, move up north, it'll make your life easier.

>telling people to move to the most worthless area in Canada.

How about no?

>telling people to move to the most worthless area in Canada.

How about no?

I feel we should refrain from referring to Quebec as being part of Canada.
This way you don't have to worry about offending anyone since Quebec wants to be its own country and most everyone finds Quebec to be useless.

GDI forums, someone let the ferrets out.

>telling people to move to the most worthless area in Canada.

How about no?

I didn't say move to Quebec, I just said move to Canada. And separatism has a died down a bit since the last elections. Also, Quebec produces a fifth of the Canadian GDP, as well as contain a third of the electoral ridings.