Help building a computer.

Okay so I figure my budget is just too low, now I'm wondering like the PC illterate I am. will these parts all work together?

Processor
Model‎ ‎Intel® Core2 Quad Processor Q8300‎
‎ Processor Number ‎ ‎Q8300‎

Mother Board

 Spoiler

Model‎ ‎ GA-G31M-ES2L‎
‎ CPU‎ ‎ 1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package‎
‎ (Go to GIGABYTE's website for the latest CPU support list.)‎
‎ 2. L2 cache varies with CPU ‎
‎ Front Side Bus‎ ‎ 1. 1600(O.C.)/1333/1066/800 MHz FSB ‎
‎ Chipset‎ ‎ 1. North Bridge: Intel® G31 Express Chipset‎
‎ 2. South Bridge: Intel® ICH7 ‎
‎ Memory‎ ‎ 1. 2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory‎
‎ 2. Dual channel memory architecture‎
‎ 3. Support for DDR2 1066(O.C.)/800/667 MHz memory modules‎
‎ (Go to GIGABYTE's website for the latest memory support list.) ‎
‎ Onboard Graphics‎ ‎ 1. Integrated in the North Bridge ‎
‎ Audio‎ ‎ 1. Realtek ALC883 codec‎
‎ 2. High Definition Audio‎
‎ 3. 2/4/5.1/7.1-channel (Note)‎
‎ 4. Support for S/PDIF Out‎
‎ 5. Support for CD In ‎
‎ Note: To configure 7.1-channel audio, you need connect with the port of HD Audio standard via front panel and enable the multi-channel audio feature through the audio driver.‎
‎ * To set up an 8 channel audio configuration, you must use 5.1/7.1 Surround Cable (Optional). Please refer to the Accessories for more detail information.‎
‎ LAN‎ ‎ 1. RTL 8111C chip (10/100/1000 Mbit) ‎
‎ Expansion Slots‎ ‎ 1. 1 x PCI Express x16 slot‎
‎ 2. 1 x PCI Express x1 slot‎
‎ 3. 2 x PCI slots ‎
‎ Storage Interface‎ ‎ South Bridge:‎
‎ 1. 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices‎
‎ 2. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices ‎
‎ iTE IT8718 chip:‎ ‎ 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive ‎
‎ USB‎ ‎ 1. Integrated in the South Bridge‎
‎ 2. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) ‎
‎ Internal I/O Connectors‎ ‎ 1. 1 x 24-pin ATX main power connector‎
‎ 2. 1 x 4-pin ATX 12V power connector‎
‎ 3. 1 x floppy disk drive connector‎
‎ 4. 1 x IDE connector‎
‎ 5. 4 x SATA 3Gb/s connectors‎
‎ 6. 1 x CPU fan header‎
‎ 7. 1 x system fan header‎
‎ 8. 1 x front panel header‎
‎ 9. 1 x front panel audio header‎
‎ 10. 1 x CD In connector‎
‎ 11. 1 x S/PDIF Out header‎
‎ 12. 2 x USB 2.0/1.1 headers‎
‎ 13. 1 x chassis intrusion header‎
‎ 14. 1 x power LED header ‎
‎ Back Panel Connectors‎ ‎ 1. 1 x PS/2 keyboard port‎
‎ 2. 1 x PS/2 mouse port‎
‎ 3. 1 x parallel port‎
‎ 4. 1 x serial port‎
‎ 5. 1 x D-Sub port‎
‎ 6. 4 x USB 2.0/1.1 ports‎
‎ 7. 1 x RJ-45 port‎
‎ 8. 3 x audio jacks (Line In/Line Out/Microphone) ‎
‎ I/O Controller‎ ‎ 1. iTE IT8718 chip ‎
‎ H/W Monitoring‎ ‎ 1. System voltage detection‎
‎ 2. CPU temperature detection‎
‎ 3. CPU/System fan speed detection‎
‎ 4. CPU overheating warning‎
‎ 5. CPU/System fan fail warning‎
‎ 6. CPU fan speed control ‎
‎ BIOS‎ ‎ 1. 2 x 4 Mbit flash‎
‎ 2. Use of licensed AWARD BIOS‎
‎ 3. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b ‎

Hard Drive

 Spoiler

Model‎ ‎ST3500418AS‎
‎ Capacity‎ ‎ 500 GB‎
‎ Speed‎ ‎7200 rpm‎
‎ Cache‎ ‎ 16 MBytes‎

Memmory

2GB Kingston Value x2

Graphics Card

 Spoiler

Model‎ ‎ENGT220/DI/1GD2(LP)‎
‎ Graphics Engine‎ ‎ NVIDIA GeForce GT 220‎
‎ Bus Standard‎ ‎ PCI Express 2.0‎
‎ Video Memory‎ ‎ DDR2 1G‎
‎ Effective Memory Size‎ ‎ 1024 MB‎
‎ Engine Clock‎ ‎ 625 MHz‎
‎ Shader Clock‎ ‎ 1360 MHz‎
‎ Memory Clock‎ ‎ 800 MHz ( 400 MHz DDR2 )‎
‎ Memory Interface‎ ‎ 128-bit‎
‎ CRT Max Resolution‎ ‎ 2048 x 1536‎
‎ DVI Max Resolution‎ ‎ 2560 x 1600‎
‎ D-Sub Output‎ ‎ Yes x 1‎
‎ DVI Output‎ ‎ Yes x 1 (DVI-I)‎
‎ HDMI Output‎ ‎ Yes x 1‎
‎ HDCP Support‎ ‎ Yes‎
‎ Software Bundled‎ ‎ ASUS Utilities & Driver‎
‎ Low Profile Bracket Bundled‎ ‎ Yes ( 2 slots ) ‎

Fan

 Spoiler

Socket‎ ‎1156/775/AM2/754/939/940‎
‎ Dimensions‎ ‎121(L) x 121(W) x 67(H) mm‎
‎ Weight‎ ‎848g‎
‎ Base Material‎ ‎Pure Copper‎
‎ Dissipation Area‎ ‎3,500‎
‎ Bearing Type‎ ‎2 Ball-Bearing‎
‎ Speed(1)‎ ‎1,150rpm ± 10\\% ~ 2,300rpm ± 10\\%‎
‎ Noise Level(2)‎ ‎17dBA ± 10\\% ~ 32dBA ± 10\\%‎

Power Suply

 Spoiler

Model‎ ‎ SS-500ET‎
‎ Features‎ ‎ Specification compliance: ATX12V v2.3 ‎
‎ Support the latest Intel & AMD Socket ‎
‎ PCI Express & Serial ATA ready ‎
‎ Double forward converter circuit ‎
‎ High efficiency and reliability ‎
‎ Low ripple & noise ‎
‎ Super low noise fan control ‎
‎ Short circuit protection on all outputs ‎
‎ Over voltage protection & Over power protection ‎
‎ 100% hi-pot test ‎
‎ 100% burn in, high temperature cycled on/off ‎
‎ Input frequency‎ ‎ 47/63 Hz ‎
‎ Inrush current, cold start‎ ‎ 100A max. ‎
‎ Efficiency‎ ‎ at normal input voltage ≧82% ‎
‎ Line regulation‎ ‎ +/-1% typical ‎
‎ Load regulation‎ ‎ +/-5% typical ‎
‎ Cross regulation‎ ‎ +/-5% typical ‎
‎ Ripple / noise‎ ‎ 1% ‎
‎ ‎ ‎MTBF, full load @ 25℃ amb. Excluding the ‎
‎ DC fan‎ ‎ >100k hrs ‎
‎ Power Factor Correction‎ ‎ 99% typical ‎

Case

 Spoiler

Model‎ ‎VG7000BWS ‎
‎ Case Type‎ ‎Middle Tower ‎
‎ Side Panel‎ ‎Transparent window ‎
‎ Net Weight‎ ‎6.19 kg / 13.65 lb ‎
‎ Dimension (H*W*D)‎ ‎440.0 x 200.0 x 500.0 mm ‎
‎ (17.3 x 7.9 x 19.7 inch) ‎
‎ Cooling System‎ ‎Front (Intake) : 120 x 120 x 25 mm (optional)‎
‎ Rear (Exhaust) : 120 x 120 x 25 mm, 1300rpm, 17dBA ‎
‎ Drive Bays‎ ‎11 ‎
‎ - Accessible 4 x 5.25’’, 2 x 3.5’’ ‎
‎ - Hidden 5 x 3.5’’ ‎
‎ Material‎ ‎SECC ‎
‎ Color‎ ‎Black ‎
‎ Expansion Slots‎ ‎7 ‎
‎ Motherboards‎ ‎Micro ATX , Standard ATX ‎

if someone could let me know if these parts would all work together / if I forgot a critical part I'd really appreciate it, I'm sure looking through all this mess of a post is a headache but I really need an answer for this, I gotta go buy a PC tommorow.


the total for these parts comes out to . 2815 Israeli shekels = 781.35955 U.S. dollars