2010-08-25, 12:09 PM
also, you may check if the voltage is till within stable range. You may monitor it either in most BIOS or using motherboard voltage monitoring softwares. You may end up need a new power supply, or unplug the unnecessary devices.
check the system event log see if you can find anything interesting
if it is overheating, time to un-dust the interior of the PC (thanks kirayamato26 for correction)
oh... u mentioned there are no problem in win7, are you currently having both xp and win7 installed at the same time?
PS. You may install the DDR2 rams in Slot1 and Slot2 so the dual channel mechanism can be "activated"
Do u OC/ manually adjust the frequency of the RAM?
check the system event log see if you can find anything interesting
if it is overheating, time to un-dust the interior of the PC (thanks kirayamato26 for correction)
oh... u mentioned there are no problem in win7, are you currently having both xp and win7 installed at the same time?
PS. You may install the DDR2 rams in Slot1 and Slot2 so the dual channel mechanism can be "activated"
Do u OC/ manually adjust the frequency of the RAM?