SP Resets

Since it's been requested at the other thread on SW, I'll post this here as well:
[spoiler=Here's what it looks like when you double-click it]
*Note it looks funny because I used Excel to put the screenshots together, otherwise, it's just pictures of multiple boxes together.[/spoiler]As you can see, it will not let me pull out any 1st, 2nd, or 3rd job points. I can still see the full books, but only when I click the 4th job tab are there orange down-arrows indicating that I may lower the skills. Interestingly though, the 4th job Tab does not have that "SP Able to Reset" at the bottom.
[spoiler=Here's what happens when I try resetting a point from fourth job]Note that the fourth job points are the only ones capable of being reset.
[/spoiler]The 1st, 2nd, and 3rd job books disappear. I may only reset it into 4th job points. =(

I thought over again what you said but that won't work for my purposes.

Assuming that it does work, then...
1) I put a point in 3rd job skills
2) I use AP reset to pull out that point again...
3) What do I do with it? Put it back into 4th job?
4) The fourth job point, now extracted back to 4th job from 3rd job, means the same scenario as the Screenshots I posted above, will happen. =(

I'm trying to reset Comp into Booster, both of which are third job skills.

The reset will only let you pull out sp that you aquired after you obtained 4th job. If you place one 4th job sp into a 3rd job skill (Booster) then when you double click the reset to see what you can pull it out of you may pull out one sp from 3rd job from any area (Comp) and put the sp in the 4th job skill you want.

So for example you lvl up and you get three 4th job sp. You place 3 points into Booster (3rd job), you use three 4th jpb SP resets and you pull your three points out of Comp and place them into Blizzard or w/e 4th job skill you were working on.

If you double click the reset before you applied any sp you obtained in the 4th job to the 3rd job you naturally don't see any option to pull it out because a 4th job sp reset only allows points you applied (to any job 1,2,3,4) during your 4th job to be removed and then applied to 4th job skills only.

For example I applied 2nd job sp to a 1st job skill (cuz holy arrow is useless) and in the 3rd job I applied 1 sp to a 2nd job skill (cuz 4th job was actually released and I changed my build and decided 1 more mp eater was better than 10 more sec of door). After mts came out and I no longer had to pay my own real $$$ for sp resets I bought a 3rd job sp reset. When I double clicked it I could take 1 point out of 1st job or 1 point out of 2nd job (or any number of points out of 3rd job) and then I had the option to apply it to a 3rd job skill so I pulled a point out of magic claw and applied it to door since I don't use claw at all anymore.

So it works, but you have to apply the points first because you may only remove skill points that were earned/applied during 4th job.

So for your pictures, after you apply 1 sp from 4th job to a 3rd job skill then when you use your sp reset the 3rd job skill book will have a 1 at the bottom and the arrows will activate (if you push down on any one of them the rest of them will go to 0 because you only applied 1 point). If you applied any of your 3rd job sp to 2nd job then you will also see the option for 2nd job as well.

I think the part you are missing is that you do not have to pull the point out of the same skill you placed it into. You can choose to pull the sp out of any skill but you are limited to only pulling sp that was placed during your 4th job. So if you place one 4th job sp in 3rd job skill you may pull out 1 sp from ANY 3rd job skill. And then you must apply it to a 4th job skill.

Does that make sence?