Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Warrior accuracy post BB?
#1
So whats the info about acc after BB? I'm a bit lost on the acc part D:
Thx in advance
Reply
#2
In order to have a 100% hit rate, you need to be the same level as the monster, and have accuracy equal to the monster's avoid.
Reply
#3
This thread has all the info you need, pretty much: http://www.southperry.net/showthread.php?t=31480


Fiel Wrote:
How Mob Avoid Works


Relevant Calculator:
Hit Rate Calculator

Relevant Formulas:
Magic Accuracy = INT + (LUK * 1.2)
Physical Accuracy = LUK + (DEX * 1.2)
Maximum Character Accuracy = 9999
Maximum Mob Avoid = 9999

Procedure:
Calculate the square root of your accuracy. Round down. Call this "Player Accuracy"
Calculate the square root of the enemy's avoid. Round Down. Call this "Mob Avoid"
After doing this, HitRate = Player Accuracy - Mob Avoid + 100
If the HitRate is greater than 100, then make the HitRate equal to 100
If the mob's level is above yours, subtract 5 from HitRate for every level he is above you. If this causes HitRate to go below 0, set HitRate to 0.
HitRate is the percentage chance that you will hit the enemy.
Reply
#4
---If your level at least matches the mob you're trying to hit (It doesn't matter if you're 1 or 100 levels higher than the mob):

Against the toughest normal mob you'll have an 85% hit rate with ZERO accuracy. On nearly everything else, it'll be 90%
Against pink bean you'll have a 75% hit rate with ZERO accuracy.

It'll climb up by the square root of your accuracy.

Example : If you have an accuracy of 100, your hit rate will increase by 10%.



---If your level is lower than the monster: subtract 5% from the final hit rate. So if you're 20 or more levels under the mob, you will always have a 0% hit rate.


So pretty much dont worry about gaining accuracy... gain levels instead. MUCH more important. Once you do match the mob, your accuracy will pretty much work itself out. You should almost never have any trouble with hitting anything that you can match if you have say... 100 accuracy.


Worst mob possible for you accuracy has an avoid of 225 (sqrt of 225 is 15).

meaning with 0 accuracy you'll lose out on 15% hit rate. Oh my... the terribleness! 85% hit rate!
Get yourself even 36 accuracy and it'll go right back up by 6% to 91. Ridiculously easy.
Reply
#5
Wow thanks for the info guys. Really appreciate it Big Grin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)