How do you HP wash?

I have 12 resets left over on my level 54 dual blader and since I started at 30 I have low HP, so I was going to try and attempt HP washing.

=P

I think you don't have enough MP. I could start washing only around lvl 80, and I started at lvl 30 too.
You basically put one point into HP and take one point off MP and place it into your stat (Luk or Dex, for you). The formula for minimum MP for DBs should be something like Level * 14 + 365.

I think you don't have enough MP. I could start washing only around lvl 80, and I started at lvl 30 too.
You basically put one point into HP and take one point off MP and place it into your stat (Luk or Dex, for you). The formula for minimum MP for DBs should be something like Level * 14 + 365.

So, I use my AP on HP, then use a reset to remove it from MP and place it on a stat - so HP/MP share points?

As a matter of fact, I just tested this out on my Dual Blader, and was capable of removing points out of MP and dumping them into HP, even though I never added any points there. :f6:

If you're wondering, I lose 12MP and gain 16HP per reset.

I think you don't have enough MP. I could start washing only around lvl 80, and I started at lvl 30 too.
You basically put one point into HP and take one point off MP and place it into your stat (Luk or Dex, for you). The formula for minimum MP for DBs should be something like Level * 14 + 365.

This was fixed for me today. My dual blade took forever to get enough mp to start washing since i started at level 30. However when i was finally unglitched today, i noticed i got my missing hp and mp back, so now im leve 10x with about 5k hp with gears

This was fixed for me today. My dual blade took forever to get enough mp to start washing since i started at level 30. However when i was finally unglitched today, i noticed i got my missing hp and mp back, so now im leve 10x with about 5k hp with gears

Yeah, they improved the HP of everyone who started at 30.