Southperry.net
Need help picking computer parts or a new computer? Click here. - Printable Version

+- Southperry.net (https://www.southperry.net)
+-- Forum: Maplers Helping Maplers (https://www.southperry.net/forumdisplay.php?fid=9)
+--- Forum: Technical Help (https://www.southperry.net/forumdisplay.php?fid=84)
+--- Thread: Need help picking computer parts or a new computer? Click here. (/showthread.php?tid=30669)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2013-07-25

Joe Wrote:Thank you very much.
1. I got the cooler since someone on r/ suggested I'd be fine with a cheap cooler, since I don't plan on OCing. What cooler would you suggest instead?
2. Will definitely change this, thanks!
3. What can I say, i absolutely fell in love with how the Corsair case looks, and even though the cases you suggest are better, I'm gonna be dumb about this and keep the Corsair. It does fit the current motherboard i picked, right? And since I don't need water cooling (i think) for now, I guess it would be acceptable?

1. depends if you want water or air. Air gives more performance for $(and silence), water gives a lower profile output. At minimum, I would suggest an h80i or better for the 3930k if you ever do get around to overclocking. Air cooler wise, I would normally just ask how much you have to spend and what your options are.


3. yes the current motherboard will fit, its standard ATX


Need help picking computer parts or a new computer? Click here. - Joe - 2013-07-25

Dudewitbow Wrote:1. depends if you want water or air. Air gives more performance for $(and silence), water gives a lower profile output. At minimum, I would suggest an h80i or better for the 3930k if you ever do get around to overclocking. Air cooler wise, I would normally just ask how much you have to spend and what your options are.


3. yes the current motherboard will fit, its standard ATX

I don't see myself overclocking in the near future, so I guess air would be fine. These are the compatible coolers that show up for me:
 Spoiler

I'm also a bit confused if I need any more coolers other than the processor one. Other than that one, are the case fans enough (if it even includes any)?

Also, I was a bit too slow to edit my previous post so here are the card options I get, not sure which the best option is:

 Spoiler



Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2013-07-26

for air cooler units what i recommend are in price tier wise:

~30$ NZXT respire T40 (despite the popularity of the CM212+, 140mm tower should work better)
~50$ Phanteks single tower cooler. whats nice about phanteks is that they offer them in different annodized colors, red, blue, white, black and orange
~70$ the most trusted cooler, the Noctua D14H 2011 despite its odd colors, it has some of the best silent fans and performance to sound in the market

for the GPU

go gigabyte if you want the 50$ lower price tag, go EVGA if you want better customer service and warranty in the U.S. EVGA arguably has the best service.


Need help picking computer parts or a new computer? Click here. - Joe - 2013-07-28

Dudewitbow Wrote:for air cooler units what i recommend are in price tier wise:

~30$ NZXT respire T40 (despite the popularity of the CM212+, 140mm tower should work better)
~50$ Phanteks single tower cooler. whats nice about phanteks is that they offer them in different annodized colors, red, blue, white, black and orange
~70$ the most trusted cooler, the Noctua D14H 2011 despite its odd colors, it has some of the best silent fans and performance to sound in the market

for the GPU

go gigabyte if you want the 50$ lower price tag, go EVGA if you want better customer service and warranty in the U.S. EVGA arguably has the best service.

Yeah those colors are definitely offputting... I'll go with the Phantek. And I guess I'll get the gigabyte since I'm outside the US anyway. Thank you SO much for all your help! n_n


Need help picking computer parts or a new computer? Click here. - Chicocl - 2013-09-25

So, I need help. I'm going to get a new Laptop (July/August next year) because my actual one is old and LoL is running at 15 FPS, yes it's sucky. So, I want a Gaming laptop but also a powerful one for programs like AutoCAD or solidworks (they have lower requirements than games, so I'm fine with a basic gaming laptop) but I wanna get the best I can. My problem is the branches, I currently have a Toshiba Satellite L300 (And when I got it new, it was a monster for MS and other stuff), so I trust toshiba, I have a so so relationship with Dell but my brother has one and it works ok but I don't trust Dell when their computers have high specs because they usually collapse (I'm looking at you Alienware Workstation "future of gaming" and XPS branch... ). So, my family mostly use Dell but I kinda feel unsure with it, whereas most friends and I feel good with Toshiba . I don't know about other Branches like Asus or HP. Some tell me that Asus G series is the bomb for laptop gaming but Idk... My budget will be limited to 1k$ now because I really don't know the real budget until I get to plan everything (this will be the lowest, so a bit over it isn't a problem). I'm going to buy this laptop in the US (NYC or Miami, I'm going both).


Need help picking computer parts or a new computer? Click here. - NeedaBanana - 2013-09-27

What is your current budget?:
$550-700

What part are you looking for? Why do you need it?:
new desktop

What parts are in your current computer?
switching from a laptop to desktop, no transferable parts. I have a mouse, keyboard and monitor.

How do you intend to use this new part or new computer? What's the heaviest load it's likely to encounter?

looking for something quick that runs cool and quiet, dont need a ton of space 500gb is more than enough for me.

general internet surfing, Maplestory and possibly Elder Scrolls Online (when it comes out) Diablo 3 (if the expansion is released soon)

If you live anywhere other than the United States, please indicate your country.
canada

pc knowledge
limited. I'd perfer something ready out of the box that runs windows 7.

a few options i've looked at:

http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=851771&Sku=C122-10920

http://www.canadacomputers.com/product_info.php?cPath=7_1203_121&item_id=046082

http://www.newegg.ca/Product/Product.aspx?Item=N82E16883258020 <--- leaning towards this one

Thanks in advance!


Need help picking computer parts or a new computer? Click here. - SuperNerd - 2013-10-07

Not sure if this is the appropriate board to ask this, but I figured it would work, so I apologize in advance if it's not.

So as some of you may or may not know, I have Spina Bifida, I won't go into great detail about what that is if you don't know, but let's just say my spinal cord didn't develop to do what it was supposed to do.

Now, onto what that has to do with laptops. Well, my current laptop is a crappy, 6-year-old, hand-me-down from my dad that weighs about 10-12 pounds, which is really starting to kill my back. I attend university only twice a week, but having to lug that thing around all day is just absolutely wrecking my spine. Which should go without saying that that is not good for someone who already has chronic back pain.

So I've saved up some cash and want to get a new laptop, but since I travel quite a bit and actually use my laptop a lot, and since I'm also a huge and very dedicated gamer (hence why I'm going for a Game Design and Development major), so it also has to have the specs to run games at good settings. But overall, the most important thing, is that I need to get something so much more lighter than what I have. To help relieve my back, I need something with no more than at least half the weight of my current laptop, so I'm looking for something 5 lbs. or less. Obviously this really narrows my choices, asking for something really lightweight but high specs. Note that cost isn't really that much of a problem, but I'd like to NOT go over $2000 if at all possible.

The one I was considering was the 14" Razer Blade, which has an overwhelming number of positive reviews, great specs, and only weighs about 4.5 lbs. which is pretty much perfect.

...But my mum's boyfriend, who is a computer enthusiast and fanatic thinks that it's not worth the price. So to sum things up: I'm just looking for some good alternative recommendations or some back-up about sticking with the Razer Blade.


Need help picking computer parts or a new computer? Click here. - Yugidude - 2013-10-07

Not exactly getting a new machine, but this is a fairly similar question to the thread.
I have a 4 Year old Dell Studio 1555 (Laptop). I'm going to replace it in the next couple years, but I need something more short-term to speed it up. After talking with some friends, I decided I was going to get an SSD (Most likely a Samsung one). If I buy one now, replace my current HDD, when my machine dies/I get a new one, can I take out the SSD and plop it in the new comp, or is it more complicated?


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2013-10-07

Yugidude Wrote:Not exactly getting a new machine, but this is a fairly similar question to the thread.
I have a 4 Year old Dell Studio 1555 (Laptop). I'm going to replace it in the next couple years, but I need something more short-term to speed it up. After talking with some friends, I decided I was going to get an SSD (Most likely a Samsung one). If I buy one now, replace my current HDD, when my machine dies/I get a new one, can I take out the SSD and plop it in the new comp, or is it more complicated?

yes you can. its like using an external drive(which really is a normal drive in a usb interface). just be sure if you change your hard drive and add a ssd, be sure that you have an operating system ready to install(or clone the drive over)


Need help picking computer parts or a new computer? Click here. - Nomad9375 - 2014-02-05

What is your current budget?:
$1-2k

This is what I have:
Case
PSU

This is what I'm looking to buy
Mobo
Proc
CPU cooler
Was originally thinking this Gfx card but I wouldn't be able to utilize all of that memory so I think I would be better off getting Gfx card or maybe upgrading to Gfx card.
Thinking about getting either a 16 GB kit RAM or save some money down the road by getting the 32 GB kit RAM.
Was originally thinking HDD for OS, HDD for Games, and HDD for storage but then I thought about getting 4 of these HDD and using RAID 1 + 0.
Also might need some thermal paste. AS5?

I think that's everything I "need" to get started.

How do you intend to use this new part or new computer? What's the heaviest load it's likely to encounter?
I'll likely never be able to utilise this to it's fullest potential but I've currently deluded myself into thinking that if I go with these parts I won't have to upgrade for say 5+ years.


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2014-02-06

Nomad9375 Wrote:What is your current budget?:
$1-2k

This is what I have:
Case
PSU

This is what I'm looking to buy
Mobo
Proc
CPU cooler
Was originally thinking this Gfx card but I wouldn't be able to utilize all of that memory so I think I would be better off getting Gfx card or maybe upgrading to Gfx card.
Thinking about getting either a 16 GB kit RAM or save some money down the road by getting the 32 GB kit RAM.
Was originally thinking HDD for OS, HDD for Games, and HDD for storage but then I thought about getting 4 of these HDD and using RAID 1 + 0.
Also might need some thermal paste. AS5?

I think that's everything I "need" to get started.

How do you intend to use this new part or new computer? What's the heaviest load it's likely to encounter?
I'll likely never be able to utilise this to it's fullest potential but I've currently deluded myself into thinking that if I go with these parts I won't have to upgrade for say 5+ years.


dat PSU quality(just note that it cannot sustain 880w on the 12v rail, so if you ever plan on dual gpus in the future, don't unless you change the power supply.

comments
1. Mobo: LGA 2011 choices arent much, at this price point, you really only have the Sabertooth and the Deluxe(slightly newer chipset, cost more)
2. Fine with IB-EK model, just dont haphazardly spend money for the black sticker given with the IB-EX
3. Personally not a fan of low end single 120mm watercooling units on upper tier processors, it works, but will not stretch out the muscle the processor can potentially give
4. GFX card: very unbalanced, most people who go LGA 2011 get top tier gpus(780, 780ti, Titan, 290, 290X). GPU horsepower > CPU horsepower for performance gain. GPU's are also the ones that age the quickest. going only mid tier RIGHT before the release of 20nm GPU's later this year will bite you quickly as the year passes on by.
5. Ram is your own choice. just find whats most of value. sweet spot tends to be around 1866 cl 9. not going to say much as ram is more relevant to synthetics and IGPUs
6. EVO is fine for genreal use, just note that it uses TLC memory and not MLC memory, so its only slightly slower in write speed(read is about the same) to comparable Sata III SSD's
7. No need to comment on HDD, HDD world is pretty stagnant
8. Thermalpaste: depends on how permanent the release is, Coollaboratory liquid pro/ultra is top tier, except its near permanent once its attached on. Here's an in depth review on methodology and practical applications of TIM and the follow up review on several TIM's


case is fine though, albeit im not really a CM person when it comes to cases, the HAF X has enough to get around


Need help picking computer parts or a new computer? Click here. - Nomad9375 - 2014-02-06

Dudewitbow Wrote:dat PSU quality(just note that it cannot sustain 880w on the 12v rail, so if you ever plan on dual gpus in the future, don't unless you change the power supply.

comments
1. Mobo: LGA 2011 choices arent much, at this price point, you really only have the Sabertooth and the Deluxe(slightly newer chipset, cost more)
2. Fine with IB-EK model, just dont haphazardly spend money for the black sticker given with the IB-EX
3. Personally not a fan of low end single 120mm watercooling units on upper tier processors, it works, but will not stretch out the muscle the processor can potentially give
4. GFX card: very unbalanced, most people who go LGA 2011 get top tier gpus(780, 780ti, Titan, 290, 290X). GPU horsepower > CPU horsepower for performance gain. GPU's are also the ones that age the quickest. going only mid tier RIGHT before the release of 20nm GPU's later this year will bite you quickly as the year passes on by.
5. Ram is your own choice. just find whats most of value. sweet spot tends to be around 1866 cl 9. not going to say much as ram is more relevant to synthetics and IGPUs
6. EVO is fine for genreal use, just note that it uses TLC memory and not MLC memory, so its only slightly slower in write speed(read is about the same) to comparable Sata III SSD's
7. No need to comment on HDD, HDD world is pretty stagnant
8. Thermalpaste: depends on how permanent the release is, Coollaboratory liquid pro/ultra is top tier, except its near permanent once its attached on. Here's an in depth review on methodology and practical applications of TIM and the follow up review on several TIM's


case is fine though, albeit im not really a CM person when it comes to cases, the HAF X has enough to get around

PSU was a gift but if it's bad I can buy a better one if I need to dual gpu.

2+1. Other processor I was looking at is the i7-4771 and I guess maybe the SABERTOOTH Z87 to go with it.

3. Didn't really considered overclocking since the processor has a lot of power on it's own and it probably wouldn't do much for me so maybe the H100i or a different cooler entirely if I wanted to go that route?

4. The 780 and up is kind of a big price jump for me. The 290 could be doable but then I'd lose out on physx, though there aren't too many games that use it, unless I also get an nvidia card and use the patch. I think I can wait for the newer cards to come out and see what they have to offer.

6. I'll start reading up on that it looks like something I should consider.

8. I'll read those too. If I stick with the LGA 2011 then permanent probably won't be a problem.

Case was a gift too.


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2014-02-06

Nomad9375 Wrote:PSU was a gift but if it's bad I can buy a better one if I need to dual gpu.

2+1. Other processor I was looking at is the i7-4771 and I guess maybe the SABERTOOTH Z87 to go with it.

3. Didn't really considered overclocking since the processor has a lot of power on it's own and it probably wouldn't do much for me so maybe the H100i or a different cooler entirely if I wanted to go that route?

4. The 780 and up is kind of a big price jump for me. The 290 could be doable but then I'd lose out on physx, though there aren't too many games that use it, unless I also get an nvidia card and use the patch. I think I can wait for the newer cards to come out and see what they have to offer.

6. I'll start reading up on that it looks like something I should consider.

8. I'll read those too. If I stick with the LGA 2011 then permanent probably won't be a problem.

Case was a gift too.

If you are looking for higher end stuff, you might as well get a 4770k(to actually make use of some overclocking functions, no need to push it hard, but the option is always nice) as it would put a post 200$ mobo uses to nothing. On top of that, If you wanted to minimize cost, no need for a 200+ mobo if you are only going to do marginal overclocks, even budget choices around 160$ are generally more than enough for most system builders(e.g I run a i7-3770k on a ~150$ mobo at 4.5ghz) unless theres something you want out of a higher end motherboard(room for better cpu overclocking, better lanes for SLI/Crossfire, other stuff) theres no need to spend the extra on mobo which could potentially go into a new PSU or get you a better gpu.

when it comes to cpu choice, you are essentially at the gamble spot with LGA 1150. get a i5-4670k which is already strong on its own and use excess money for a gpu/other goodies, or gamble if future games will utilize intel's hyperthreading technology well in the future, as more AAA titles are going to be multithreaded since the xbone has 6 dedicated game cores and the ps4 has 7 dedicated game cores.

note that when i say near permanent on the coollab liquid pro, it sticks to coolers nearly like glue. once you remove the cooler, it is moderately hard to clean off(as it is nearly literally liquid metal)


Need help picking computer parts or a new computer? Click here. - Derosis - 2014-03-11

http://pcpartpicker.com/p/38iEK

I'm updating my PC and I'm gonna reuse parts I have in my old PC as I hate wasting pomegranate I don't need to. Anything that's marked as purchased is stuff I already own. If you think I need to make any adjustments let me know. But that's some of the parts i'm trying to get when I can.
I think new Memory and a new HDD w/ a SSD would be a good investment, but I dunno.


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2014-03-11

Derosis Wrote:http://pcpartpicker.com/p/38iEK

I'm updating my PC and I'm gonna reuse parts I have in my old PC as I hate wasting pomegranate I don't need to. Anything that's marked as purchased is stuff I already own. If you think I need to make any adjustments let me know. But that's some of the parts i'm trying to get when I can.
I think new Memory and a new HDD w/ a SSD would be a good investment, but I dunno.

any reason for a low end full tower case along with a z77 board(note that a i5-3330p cannot be overclocked by multipliers, making the z77 uses limited). if it is budget oriented, I would recommend cutting back on case and mobo capabilities for real performance gains like an SSD


Need help picking computer parts or a new computer? Click here. - Derosis - 2014-03-11

Dudewitbow Wrote:any reason for a low end full tower case along with a z77 board(note that a i5-3330p cannot be overclocked by multipliers, making the z77 uses limited). if it is budget oriented, I would recommend cutting back on case and mobo capabilities for real performance gains like an SSD


I forgot to mention the case was going to be set up at Half the price, as I got a good deal for it at a local store. Again, I appreciate it, and if you got any update recommendations do let me know. I have a minimum of $500 USD. But, yeah, poor purchasing decisions on my part.


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2014-03-12

Derosis Wrote:I forgot to mention the case was going to be set up at Half the price, as I got a good deal for it at a local store. Again, I appreciate it, and if you got any update recommendations do let me know. I have a minimum of $500 USD. But, yeah, poor purchasing decisions on my part.

understandable for the case at least. as long as you arent paying 80+ for that case, then it should be alot better.

essentially how I like to look at upgrade platforms, you generally have 2 options:

Most performance per $ vs Upgrade room

for instance, with the Mobo + CPU you picked i'll explain it a bit.

the i5-3300P is a lower end i5 quad core. in general, intel locks out overclocking on all CPUs except ones labeled K or X. in this case, P is generally designed for slightly lower wattage use. an i5 quad is still a solid price/perf component.

with the z77 extreme 4, its an lga 1155(sandy/ivy bridge) motherboard with full motherboard capabilities which generally include overclocking processors. if you dont plan to ever upgrade the i5-3300P to an i5-3570k or an i7-3770k(as lga 1155 is dead atm, no more new processors will be made for it) the overclocking function of the board will never be used by you, and all it will be is resell value. This of course would be the "upgrade path" option.

essentially at a price/perf corner, you have 2 options. keep the i5-p and switch the motherboard to a cheaper h61(bare bone motherboard with basic functions), h67(slightly upscale) and z68 for sandy bridge stuff. but these are slightly outdated and I would recommend either b75(was originally designed for business, its closer to h61 I guess, but for ivy bridge), h77(ivy bridge equivalent to h67) or z75(barebone version of a z77) to cut costs a bit.

though only make that decision on the base of one thing. is that really low end boards only support 16x/4x crossfire(slightly less performance than 8x/8x crossfire) and only make that decision if you plan to crossfire.(I'm only assuming the possibility due to 750w PSU) so in the end:


Price/Performance: low end i5 + low end ivy bridge mobo + SSD/Any computer upgrade(i actually upgraded my comp with SSD recently,. I now get the feeling of "Once you go black, you never come back"
Upgradability: any ivy/sandy bridge processor + medium/higher end mobo. this will allow you to be slightly more open about maximizing performance on a platform you do not want to change much. though, its not cost effective as the money spent on cooling performance, the K processor and a better mobo could be used for something else in your situation.


another question is, is there a reason why you would prefer to use the sandy/ivy bridge platform(LGA 1155) rather than the newer Haswell based platform(LGA 1150)?

power consumption should be lower on non overclocked processors, as well as if you ever get interested in emulation(e.g Dolphin Emulation playing Smash) haswell gets significant performance gains vs sandy/ivy. else, haswell is marginally a 5% slight performance gain compared to sandy/ivy.


Need help picking computer parts or a new computer? Click here. - Derosis - 2014-03-12

[MENTION=7833]Dudewitbow[/MENTION]; nope there isn't anything not wanting me to use the newer Haswell. I just didn't want to pay so much, and not leave room in my wallet for something like an SSD. But i'll look at the Haswell based platforms too while I'm at it. Do you have any specific parts? And I was going to upgrade to an 3570K eventually. But to be honest, anything is better than a AMD Anthlon II X4 640 on a MSI M4A77TD. Which is what i'm sporting at the moment Tongue


Need help picking computer parts or a new computer? Click here. - CrimsonJohnny - 2014-04-20

Soon, thy suffering shall end.

What is your current budget?:
$700-$800

What part are you looking for? Why do you need it?:
I'm taking a list of parts from http://www.logicalincrements.com/ (the $617 row) and buying it, though I need a CD drive and a monitor supported by the graphics card, because my current monitor is absolutely not. I don't know anything about finding compatible parts.

What parts are in your current computer?
The only reusuable parts in this thing are the keyboard and mouse.

How do you intend to use this new part or new computer? What's the heaviest load it's likely to encounter?
It will be for gaming. I don't play any overly CPU intensive games, so heavy loads shouldn't be an issue.

If you live anywhere other than the United States, please indicate your country.
I'm in the U.S.

With that list of parts + Optical Drive/OS/Monitor, I should be ready to put that sucker together. I'd appreciate pointers on finding the missing parts I listed, and any important details I may have overlooked (such as a vital part I didn't even plan to order.) Thanks in advance!


Need help picking computer parts or a new computer? Click here. - Dudewitbow - 2014-04-20

CrimsonJohnny Wrote:Soon, thy suffering shall end.

What is your current budget?:
$700-$800

What part are you looking for? Why do you need it?:
I'm taking a list of parts from http://www.logicalincrements.com/ (the $617 row) and buying it, though I need a CD drive and a monitor supported by the graphics card, because my current monitor is absolutely not. I don't know anything about finding compatible parts.

What parts are in your current computer?
The only reusuable parts in this thing are the keyboard and mouse.

How do you intend to use this new part or new computer? What's the heaviest load it's likely to encounter?
It will be for gaming. I don't play any overly CPU intensive games, so heavy loads shouldn't be an issue.

If you live anywhere other than the United States, please indicate your country.
I'm in the U.S.

With that list of parts + Optical Drive/OS/Monitor, I should be ready to put that sucker together. I'd appreciate pointers on finding the missing parts I listed, and any important details I may have overlooked (such as a vital part I didn't even plan to order.) Thanks in advance!

the 617$ row isnt so bad. I can pull pricing directions dependent on time of purchase for you. its good to buy somethign that is on sale on purchase day for best results. so to be clear what you need is the entire tower(and innards) + monitor + OS? (with cd drive?)